Triple "L" Custom Parts, Inc.

Insta Pan Seat Pan Kit, 96 oz.

Wed, 02 Jul 2008 12:42:03 -0500

]]>Veteran bike builders and beginners alike will gain huge time and cost savings with this great new high-strength seat pan kit. No more hammered sheet metal or pouring fiberglass. Simply combine two clay-like components then roll them out onto provided FRP/Kevlar® fabric and cut to shape then lay in your seat area to cure overnight. Clay material is super strong and can be machined like hardwood. Some easy preparation required follow instructions provided. Kit makes one seat pan approximately 14" X 24". All components shown are included with kit. Dual rider seats requires two kits.
]]>

Forward Controls For 00-06 FXST, 2" Extended

Wed, 28 May 2008 05:33:22 -0500

]]>

Radius mill design with bearings instead of bushings for smooth operation
Brake lines install in the back side of the master cylinder for a clean look
Comes assembled using chrome hardware and band-type pegs
Installation hardware not included sold separately

]]>

Forcewinder XR

Mon, 11 Feb 2008 20:22:04 -0600

]]>

Its the original high performance forward-mounted air cleaner! Forcewinder XR fits Buell®, XL, BT and Twin Cams. It is the original forward mounted air intake system. Features high performance and polished aluminum construction. Complete with both K&N® intake and PCV filters, stainless allen bolts and gaskets, and Outerwears® Black Dry Charger weather inhibiting filter wrap. Adapters available to fit S&S® E and G and Mikuni HSR 42/45 carbs. If converting from an OEM setup, an aftermarket mounting bracket and breather kit will be necessary.

For 86-Later Evolution® w/ CV Carb, Black Elbow

]]>

Forcewinder XR-2

Mon, 11 Feb 2008 20:16:49 -0600

]]>

The XR2 incorporates Pro-Bike billet breather components into the precision high flow Forcewinder. Features its own cool billet and hardline breather setup that loops into the back of the filter and a larger tube to house the temp sensor pressure fitting into the back of the filter. Includes an Outerwears® weather-inhibiting rain sock that can be run all the time as a pre-filter, with virtually no loss of horsepower. Its BEST to use Force.Support Bracket not included.

For 99-06 TC88® & 02-06 FLT Models w/ EFI, Show Polished Elbow

]]>

Super E Carburetor Kit For 93-99 BT

Mon, 11 Feb 2008 17:11:26 -0600

]]>

Fits Models:

Harley-Davidson® FLHR, Road King®, Carbureted 1995-1998
Harley-Davidson® FLHTC, Electra Glide® Classic 1993-1998
Harley-Davidson® FLSTF, Fat Boy®, Carbureted 1993-1999
Harley-Davidson® FLSTS, Heritage Springer® Softail® 1997-1999
Harley-Davidson® FLTCU, Ultra Tour Glide Classic 1993-1995
Harley-Davidson® FLTR, Road Glide®, Carbureted 1998
Harley-Davidson® FXD, Dyna Super Glide¬ 1995-1998
Harley-Davidson® FXDL, Dyna® Low Rider®, Carbureted 1993-1998
Harley-Davidson® FXDS, Dyna® Convertible 1994-1998
Harley-Davidson® FXLR, Low Rider® 1993-1994
Harley-Davidson® FXR, Super Glide® 1993-1994
Harley-Davidson® FXRS-CON, Low Rider® Convertible 1993-1994
Harley-Davidson® FXRS-SP, Low Rider® Sport 1993
Harley-Davidson® FXST, Softail, Standard Late Model 1999
Harley-Davidson® FXSTB, Night Train®, Carbureted 1999
Harley-Davidson® FXSTC, Softail® Custom 1993-1999
Harley-Davidson® FXSTS, Softail® Springer® 1993-1999
Harley-Davidson® FXSTSB, Softail® Springer® Bad Boy 1995-1997

]]>

Troublemaker Darksides Widetail Exhaust For 96" Carbureted Bi

Mon, 11 Feb 2008 14:32:29 -0600

Stepped head pipe design with no visible bluing Top-end horsepower without sacrificing low-end torque A metallic ceramic coating on the internal head pipes retains the right amount of heat, increasing the exhaust velocity for more horsepower Includes a muffler cartridge that delivers a deep rumble Optional muffler cartridges are also available offering either a smooth mellow sound or loud sound with improved flow Includes exhaust gaskets, c-clips, chromed flanges, machined brackets, nuts, bolts and detailed instructions.
]]>]]>

Troublemaker Darksides Exhaust For 80"-95" Softail®, Scallop-C

Mon, 11 Feb 2008 14:28:38 -0600

]]>Hooker® Darksides are for those who have gone raw or a little more stealthy. These antibling pipes are coated in high-temp black ceramic coating, a formula longago perfected by the aerospace industry. The matte black finish will always look good and stay easy to clean with its semi-smooth surface texture. Slam on a set of chrome, black or silver anodized billet tips to finish them off with some added contrast! Available separately.
]]>

Curb Feelers RSD w/heat shields

Tue, 30 Nov 1999 00:00:00 -0600

]]>

This style has bell-like billet aluminum tips for race-inspired looks. Stepped from 1.75" to 2". Now with heat shields and removable baffles! Transmission mounted.

NOTE: In the comments section please state the make, model and engine the pipes are being ordered for.

]]>

Stop & Go Tire Repair Kit w/ CO2

Sat, 10 Nov 2007 09:50:14 -0600

]]>
]]>

Stop & Go Tire Repair Kit

Sat, 10 Nov 2007 09:48:28 -0600

]]>
]]>

MiniSet Compact Tool Kit for H-D®

Sat, 10 Nov 2007 09:46:01 -0600

]]>
]]>

Outback'r H13 Compact Tool Set

Sat, 10 Nov 2007 09:43:49 -0600

]]>
]]>

Blistas RSD

Tue, 30 Nov 1999 00:00:00 -0600

]]>

Stepped from 1 3/4" to 2" to billet tips

Transmission mounted

Heat Shields available

]]>

WTF's

Tue, 30 Nov 1999 00:00:00 -0600

Original Joe Martin design!

These pipes are twisted with performance in mind
Stepped from 1 3/4" - 2" - 2 1/4"
Frame mounted, fits softail and most custom applications with evolution or twin cam 88"
Comes with mounting bracket and hardware

]]>]]>

Slickstas

Tue, 30 Nov 1999 00:00:00 -0600

]]>

Stepped from 1 3/4" - 2" - 2 1/4" for added back pressure and performance
Frame mounted, fits softail and most custom applications with evolution or twin cam 88"
Now available for Right Side Drive Applications

]]>

Road Tech H3 Tool Kit for H-D

Tue, 06 Nov 2007 18:28:06 -0600

]]>Combines the best features of the popular EconoKIT H1 and MiniSet tool kits into one pouch. Includes mini ratchet and sockets, combinations wrenches, locking pliers, adjustable wrench, 6-in-1 screwdriver, LED flashlight, tire gauge, hex and Torx® keys, and much more! All tools are mechanic-grade with a lifetime guarantee.
]]>

Cruz Tools EconoKIT

Tue, 06 Nov 2007 18:20:44 -0600

]]>The H1 Tool Kit is a comprehensive roadside solution for all Harley-Davidson® models (except V-Rod®). Includes combination and adjustable wrenches, locking pliers, hex and Torx® keys. It also includes LED flashlight, spark plug sockets, 6-in-1 screwdriver, and more! Tools are mechanic grade and lifetime guaranteed. Tough roll-up pouch. The H2 is an affordable and compact, yet highly capable, tool kit for Harley-Davidsons® contains the most commonly-needed tools and roadside items. Tools are mechanic grade and lifetime guaranteed. Includes tough zip-up pouch.

]]>

Genesis SVS Helmet

Fri, 02 Nov 2007 18:21:31 -0500

]]>

Troublemaker Darksides Exhaust For 80"-95" Softail®, Slash-Cut

Fri, 21 Sep 2007 17:07:06 -0500

Tue, 30 Nov 1999 00:00:00 -0600

]]>
]]>

Tue, 30 Nov 1999 00:00:00 -0600

]]>
]]>

Tue, 30 Nov 1999 00:00:00 -0600

]]>
]]>

Ultima, Softail style shocks

Tue, 12 Jun 2007 22:39:41 -0500

]]>

Fits 1989 thur 1999 FXST

Unmathed value
New tooling
Superior damping
Fully adjustable
Chrome plated

]]>

Ultima 6-speed Trans. Black

Tue, 30 Nov 1999 00:00:00 -0600

]]>

Utima's® new 6-SPEED Transmissions are the
ultimate upgrade for bikes with 100+ horsepower engines.
Designed to compliment our new El Bruto® series engines
or any high horsepower unit you¹ve created, they are packed with features found in much higher priced transmissions and are delivered with a 2 year/20,000 mile limited warranty.

Features include:

Gears and shafts made from hardened 8620 steel giving you
years of service with big inch engines.
Pro-cut lead-in ramps for positive shifting.
Aluminum bronze shift forks for durability and longevity.
Roller detent gives you smooth, positive shifting action.
Billet trap door.
Reinforced transmission case machined from
permanent mold A356-T6 aluminum.
Close ratio 2.94 low gear set.
Assembled by professionals and bench tested.

Left Side Drive Ultima® 6-Speed
Fits Softail® models 1991-1995 and
1996-1999 if speedo adjustment unit
57-154 or equivalent is used.

]]>

Ultima 6-speed Trans. Polished

Tue, 30 Nov 1999 00:00:00 -0600

]]>

Features include:

Left Side Drive Ultima® 6-Speed
Fits Softail® models 1991-1995 and
1996-1999 if speedo adjustment unit
57-154 or equivalent is used.

]]>

Ultima 6-speed Trans. Cast

Tue, 12 Jun 2007 21:53:48 -0500

]]>

Features include:

Left Side Drive Ultima® 6-Speed
Fits Softail® models 1991-1995 and
1996-1999 if speedo adjustment unit
57-154 or equivalent is used.

]]>

T-Bars Control System w/ DD6000 Gauge (9/16")

Tue, 30 Nov 1999 00:00:00 -0600

Check out CCCS® for controls that exude the ultimate in clean minimalism. These controls feature seven micro switches whose functions are not labeled, allowing you to assign them for various functions; i.e., air suspension, nitrous, etc. Both reservoirs are concealed and there are no visible wires, cables or hoses above the top tree. With their exclusive dual cable internal throttle pre-installed, each system ships complete and fully assembled including install kit with throttle cables, hydraulic fittings, etc. Premium systems are available with Dakota Digital® vacuum fluorescent gauges as indicated below. These gauges are beefed up internally to take the abuse that a big stroker motor puts out and can be used on cable drive or electronic speedo applications. You will need to order the appropriate speedo adaptor for your application when you place the order.
]]>]]>

T-Bars Control System w/ DD6000 Gauge (5/8")

Tue, 05 Jun 2007 13:07:04 -0500

]]>Check out CCCS® for controls that exude the ultimate in clean minimalism. These controls feature seven micro switches whose functions are not labeled, allowing you to assign them for various functions; i.e., air suspension, nitrous, etc. Both reservoirs are concealed and there are no visible wires, cables or hoses above the top tree. With their exclusive dual cable internal throttle pre-installed, each system ships complete and fully assembled including install kit with throttle cables, hydraulic fittings, etc. Premium systems are available with Dakota Digital® vacuum fluorescent gauges as indicated below. These gauges are beefed up internally to take the abuse that a big stroker motor puts out and can be used on cable drive or electronic speedo applications. You will need to order the appropriate speedo adaptor for your application when you place the order.
]]>

Starter, 1.4kw, For 89-06 H-D

Tue, 05 Jun 2007 12:11:02 -0500

]]>The new Bulletprüf® starters are a durable, cost-competitive OE replacement starter. They are dyno tested to meet or exceed stock starter standards. These are ideal because just one starter part number fits 86-06 H-D® (Except 06 Dyna) thanks to the special conversion through-bolt included. *Not intended for engines larger than stock.
]]>

Bulletprüf® Starter, 1.4kw, For 89-06 H-D

Mon, 04 Jun 2007 21:27:41 -0500

]]>Bulletprüf® starters are a durable, cost-competitive OE replacement starter. They are dyno tested to meet or exceed stock starter standards. These are ideal for dealers because just one starter part number fits 86-06 H-D® (Except 06 Dyna) thanks to the special conversion through-bolt included. *Not intended for engines larger than stock.
]]>

FourBidden Darksides For Softail, Short, Slash, cut-end

Tue, 30 Nov 1999 00:00:00 -0600

]]>

FourBidden Darksides Exhaust For Softail¬; Short, Side/Down Slash-Cut Ends

Never before has anything like this been done and definitely never mass produced...Hooker® FourBidden V-Twin headers! Hookers heritage as the winningest header manufacturer in automotive drag racing history comes alive in these pipes. Developed in conjunction with bike builder Scott Hall at Corruption Concepts, dyno testing of the FourBidden header added 13 HP to a very mildly tuned 05 Softail®! Hookers experience in welding twin tubes allows the revolutionary look of the FourBidden series. Four 1 3/8" primary tubes merge into one 3" collector for awesome styling and aggressive sound (removable baffle included).

Fits Models:

Harley-Davidson® FLSTF, Fat Boy®, Carbureted
Harley-Davidson® FLSTFI, Fat Boy®, Fuel Injected 2001-2006
Harley-Davidson® FXST, Softail, Standard Late Model
Harley-Davidson® FXST, Softail®, Early Model 1986-1990
Harley-Davidson® FXSTC, Softail® Custom

]]>

Hammerhead, Polished

Tue, 29 May 2007 20:16:04 -0500

]]>
]]>

Hammerhead,Anodized

Tue, 29 May 2007 20:16:04 -0500

]]>
]]>

Hammerhead, Chromed

Tue, 29 May 2007 20:16:04 -0500

]]>
]]>

Spike, Polished

Tue, 29 May 2007 20:16:04 -0500

]]>
]]>

Spike, Anodized

Tue, 29 May 2007 20:16:04 -0500

]]>
]]>

Spike, Chromed

Tue, 29 May 2007 20:16:04 -0500

]]>
]]>

Tribal Bobber, Polished

Tue, 29 May 2007 20:16:04 -0500

]]>
]]>

Tribal Bobber, Anodized

Tue, 29 May 2007 20:16:04 -0500

]]>
]]>

Tribal Bobber, Chrome

Tue, 29 May 2007 20:16:04 -0500

]]>
]]>

Medieval, Polished

Tue, 29 May 2007 20:16:04 -0500

]]>

Medieval,Anodized

Tue, 29 May 2007 20:16:04 -0500

]]>

Medieval, Chromed

Tue, 29 May 2007 20:16:03 -0500

]]>

Tribal Street Fighter, Polished

Tue, 29 May 2007 20:16:03 -0500

]]>
]]>

Tribal Street Fighter,Anodized

Tue, 29 May 2007 20:16:03 -0500

]]>
]]>

Tribal Street Fighter, Chromed

Tue, 29 May 2007 20:16:03 -0500

]]>
]]>

Striped Lance, Polished

Tue, 29 May 2007 20:16:03 -0500

]]>

Striped Lance, Anodized

Tue, 29 May 2007 20:16:03 -0500

]]>

Striped Lance, Chromed

Tue, 29 May 2007 20:16:03 -0500

]]>

Tribal Lance, Polished

Tue, 29 May 2007 20:16:03 -0500

]]>
]]>

Tribal Lance, Anodized

Tue, 29 May 2007 20:16:02 -0500

]]>
]]>

Tribal Lance, Chromed

Tue, 29 May 2007 20:16:02 -0500

]]>
]]>

Premium, Polished

Tue, 29 May 2007 20:16:02 -0500

]]>
]]>

Premium, Anodized

Tue, 29 May 2007 20:16:02 -0500

]]>
]]>

Premium, Chromed

Tue, 29 May 2007 20:16:02 -0500

]]>
]]>

Pure Kustom, Polished

Tue, 29 May 2007 20:16:02 -0500

]]>

Pure Kustom, Anodized

Tue, 29 May 2007 20:16:02 -0500

]]>

Pure Kustom, Chromed

Tue, 29 May 2007 20:16:02 -0500

]]>

Pro Smooth, Polished

Tue, 29 May 2007 20:16:02 -0500

]]>
]]>

Pro Smooth, Anodized

Tue, 29 May 2007 20:16:02 -0500

]]>
]]>

Pro Smooth, Chromed

Tue, 29 May 2007 20:16:02 -0500

]]>
]]>

Classic, Polished

Tue, 29 May 2007 20:16:01 -0500

]]>
]]>

Classic, Anodized

Tue, 29 May 2007 20:16:01 -0500

]]>
]]>

Classic, Chromed

Tue, 29 May 2007 20:16:01 -0500

]]>
]]>

Premium Flat Top w/Rubber Foot Pegs (polished)

Tue, 29 May 2007 20:16:01 -0500

]]>
]]>

Premium Flat Top w/Rubber Foot Pegs (anodized)

Tue, 29 May 2007 20:16:01 -0500

]]>
]]>

Premium Flat Top w/Rubber Foot Pegs (chrome)

Tue, 29 May 2007 20:16:01 -0500

]]>
]]>

Premium Round w/Rubber Foot Pegs (polished)

Tue, 29 May 2007 20:16:01 -0500

]]>
]]>

Premium Round w/Rubber Foot Pegs (anodized)